Attapulgite as Potential Adsorbent for Dissolved Organic Carbon From Oily Water          下载免费PDF全文

Mansour Al. Haddabi  Hari Vuthaluru  Hussein Znad  Mushtaque Ahmed 《洁净——土壤、空气、水》2015,43(11):1522-1530

  相似文献   

Bromate Adsorption on Three Variable Charge Soils: Kinetics and Thermodynamics          下载免费PDF全文

Aiyin Jia  Chunde Wu  Wenchao Hu  Caixia Hu 《洁净——土壤、空气、水》2015,43(7):1072-1077

  相似文献   

Solid phase characterization and metal deportment in a mussel shell bioreactor for the treatment of AMD,Stockton Coal Mine,New Zealand     

《Applied Geochemistry》2016

The Stockton Coal Mine, located on the West Coast of New Zealand, is evaluating the use of a mussel shell bioreactor (MSB) to treat acidic metalliferous runoff from acid forming overburden. This novel approach is similar in concept to vertical flow wetlands (VFWs) and successive alkalinity producing systems (SAPS). The MSB system is a trapezoidal pit 2 m deep, 35 m long, 3–10 m wide with 60° angle sides. During operation it contained 160 tonnes (240 m³) of mussel shell material and was saturated with a 100–200 mm water cap. Influent flowed through the reactor at a mean rate of 0.3 L s⁻¹ resulting in a hydraulic retention time (HRT) of ≈6 days. The prototype MSB was in operation for a total of 1027 days, from June 2009 through March 2012, and effectively sequestered 99.7% of Al, 99.3% of Fe, 98.8% of Ni, 98.4% Tl and 99.3% of Zn, as determined from a previous evaluation of MSB performance. The MSB also effectively neutralized acidity, which resulted in an increase in influent pH from 2.8 to 6.9 in the effluent. Based on an examination of several excavated pits, five distinct reaction zones developed within the MSB. The reaction zones consisted of an allochthonous sediment layer (0–330 mm), an oxidized iron-rich ocherous layer (at 330–350 mm depth), an aluminum layer (at 350–600 mm depth) with geochemical variations throughout (350–500 mm and 500–600 mm); and a chemically reduced bottom shell layer (at 600–1100 mm). Representative samples were collected from each layer and analyzed using a combination of geochemical and physical methods to assess the stability of the secondary minerals and trace metal deportment within the MSB. Major elements Fe, Al, Ni, Tl, and Zn where preferentially associated with particular layers within the MSB. Elevated concentrations of Fe (110,000 mg kg⁻¹) were observed in the allochthonous sediment and ocherous precipitate layers, while Al (27,816 mg kg⁻¹), Ni (55 mg kg⁻¹), and Zn (655 mg kg⁻¹) were elevated within the aluminum and lower reduced depths within the MSB. Trace Tl (21 mg kg⁻¹) showed varying concentrations throughout the MSB, but was strongly correlated to lower layers of the system. Microbial biofilms were observed within the reduced portions of the shell layers often proximal to bacterial shaped sulfides. The geochemical assessment of the MSB presented in this study is the first of its kind for a MSB, and supports the argument that this system is another viable option for passive treatment of AMD.  相似文献   

Phosphate removal from water by naturally occurring shale,sandstone, and laterite: The role of iron oxides and of soluble species     

Dan Eude Kpannieu  Martine Mallet  Lacina Coulibaly  Mustapha Abdelmoula  Christian Ruby 《Comptes Rendus Geoscience》2019,351(1):37-47

Aqueous phosphate removal by three geomaterials from Ivory Coast was evaluated to determine their potential application as low-cost phosphate adsorbents in wastewater treatment. Batch experiments showed that phosphate uptake strongly depended on pH. Laterite and sandstone dissolution was less pronounced compared to shale. A correlation between concentrations of aqueous cation species released from shale and phosphate uptake was observed. The kinetics were well described using the pseudo-second-order model. Isotherms displayed a saturation level on shale, while phosphate uptake continuously increased for laterite and sandstone. The removal efficiency decreased in the following ranking order: laterite > sandstone > shale. Laterite was also the most efficient adsorbent in column experiments. The high phosphate removal efficiency of laterite (8.3 mg PO₄ g^?1) was attributed to the presence of superparamagnetic low grain sizes of goethite. Laterite is a particularly promising material for further investigation in wastewater treatment technology such as constructed wetlands.  相似文献   

A Review of Study on Fe-C Interaction and Their Adsorption Properties to Soil Heavy Metal     

Zhao Zhuanjun  Yang Yanyan  Pang Yu  Zhao Lifang  Guan Yuli  Zhang Zhaohu 《地球科学进展》2017,32(8):867-874

Nowadays, the Fe-C coprecipitate mechanism is recognized by more and more scholars and becomes the hot topic in the environmental science. On the basis of discussing the interaction between iron oxide and organic matter, and the adsorption research progress of Fe-C complexes on heavy metals, the immobilization potential of Fe-C complexes on heavy metals in polluted soil were illustrated. The surface properties and physical characterizations of iron oxide are changed regularly with the interaction of organic matter, which lead to the higher adsorption capacity of Fe-C complexes in contrast to single iron oxide. Besides, the influences of pH values, organic matter types and surface properties of iron oxides on the adsorption capacity of Fe-C complexes on heavy metals were discussed. The excellent adsorption performance of Fe-C complexes in certain conditions will provide important theoretical basis for contaminated soil remediation.  相似文献   

基于氮气吸附-核磁共振-氩离子抛光场发射扫描电镜研究川西须五段泥质岩储层孔隙结构   总被引：7，自引：5，他引：2  

庞河清  曾焱  刘成川  黎华继  彭军  严焕榕  陈俊 《岩矿测试》2017,36(1):66-74

微观孔隙作为泥质岩的有效储集空间,其孔隙结构参数是作为气藏评价及资源量估算的重要依据。本文应用氮气吸附法(NAM)、核磁共振法(NMR)、氩离子抛光及场发射扫描电镜(AIP-FESEM)研究川西须五段泥质岩微观孔隙特征,结果表明:1氩离子抛光及场发射扫描电镜在表征微观孔隙形态与类别时有一定优势,但定量表征孔隙参数时,受图像二值化阈值的影响,表征结果偏差较大,可结合氮气吸附法来定量表征其孔径大小;2核磁共振受岩石骨架影响小,能够更精细反映岩石的物性条件,可定量计算孔隙度与可动流体饱和度,但对样品的孔隙形态反映较差;3综合上述三种方法,在须五段泥质岩中可识别出一定量的纳米级中、大孔,孔径大多介于几十纳米到几百纳米之间,孔隙连通性差,孔隙度主要介于2.3%~7.4%之间,孔隙类型以粒间孔、晶间孔最发育,有机孔隙、微裂缝次之,粒内孔隙最不发育。总体而言,融合了三种技术方法能更精确、更全面地反映泥质岩孔隙结构特征,能得到更完善的储层孔隙结构参数,在定量表征泥质岩孔隙结构中具有广泛的应用前景。  相似文献   

Mechanisms and factors affecting the adsorption of sodium alginate onto modified clays     

林勇新  曹西华  宋秀贤  王楠  俞志明 《中国海洋湖沼学报》2013,31(4):867-875

Algal organic materials (AOMs) are one critical factor affecting the efficiency of modified clays used for the mitigation of harmful algal blooms (HABs). This study was conducted to develop a deeper understanding of the mechanisms and factors affecting the adsorption of AOMs onto modified clays. Sodium alginate (polysaccharide) and kaolinite modified with polyaluminium chloride (PACl) were used as AOMs and modified clay model substances, respectively, and the effects of modifier dosage, contact time, solution pH and ionic strength were investigated through batch adsorption experiments. Kinetics revealed that the alginate adsorption rate was described well by a pseudo-second order model. PACl effectively enhanced the adsorption capacity of kaolinite and increased the adsorption rate, and the optimum additive amount of PACl was 5%. The experimental data fitted both the Freundlich and Langmuir adsorption equations well. The adsorption thermodynamics for alginate onto modified clays suggests that alginate adsorption is a spontaneous process. The adsorption of alginate onto modified clays was highly dependent on pH, with a decrease in adsorption observed with increased pH to 9.48, but the opposite was true above pH 9.48. Finally, adsorption increased with increasing ionic strength.  相似文献   

Removal of Pyridine from Aqueous Solution by Adsorption on an Activated Carbon Cloth     

Pedro Alonso‐Davila  Oliva L. Torres‐Rivera  Roberto Leyva‐Ramos  Raul Ocampo‐Perez 《洁净——土壤、空气、水》2012,40(1):45-53

Pyridine is a very toxic pollutant that has to be removed from wastewater. In this work, adsorption of pyridine on activated carbon cloth (ACC) is studied as a possible alternative for eliminating pyridine from aqueous solution. The ACC was produced from polyacrylonitrile. The adsorption equilibrium data of pyridine on ACC was obtained in a batch adsorber. The experimental data was interpreted with the isotherms of Langmuir, Freundlich, and Prausnitz‐Radke (PR), and the PR isotherm better represented the experimental data. The capacity of ACC for adsorbing pyridine was favored increasing the solution pH from 3 to 6, and this effect was due to the π–π dispersive and electrostatic interactions between the pyridine species in solution and the surface complexes of ACC. The modified Langmuir model fitted reasonably well the influence of pH on the adsorption capacity. In this model was assumed that both neutral pyridine and pyridinium were simultaneously adsorbed on ACC accordingly to the experimental results. The adsorption capacity was almost independent of temperature. The reversibility study revealed that 75% of the pyridine can be desorbed from ACC indicating that part of the pyridine was irreversibly adsorbed, and possibly chemisorbed.  相似文献   

Photocatalytic Decolorization Kinetics and Mineralization of Reactive Black 5 Aqueous Solution by UV/TiO2 Nanoparticles     

Sandeep Kumar Sharma  Haripada Bhunia  Pramod Kumar Bajpai 《洁净——土壤、空气、水》2012,40(11):1290-1296

The photocatalytic decolorization and mineralization of Reactive Black 5 (RB5) dye in presence of TiO₂ Degussa P25 has been studied using artificial light radiation in a shallow pond slurry reactor. The equilibrium adsorption of dye, influence of pH (3–11), catalyst load (0.5–3.0 g/L), and dye concentration (20–100 mg/L) on decolorization kinetics were studied. The effect of area to volume ratio of photoreactor on decolorization kinetics has been also studied. Mineralization studies were performed at optimized conditions of pH (3) and catalyst load (1.5 g/L). The maximum adsorption (26.5 mg/g) of dye was found to occur at pH 3. The apparent pseudo first order decolorization rate constant (k_app) value followed the order pH 3 > pH 11 > pH 9 > pH 7. As compared to available literature reduction in total organic carbon (TOC) was minimal by the time there was complete decolorization. Initial reduction in TOC was followed by subsequent increasing trend till complete decolorization. Final decreasing trend in TOC was observed only after complete decolorization. Twelve hours of treatment under experimental conditions reduced TOC content by 70% only. Discussion of results suggest that photocatalytic treatment of colored effluent under low UV intensity, and low A/V ratio may result in completely decolorized effluent but still having high COD.  相似文献   

Synthesis and Characterization of Poly(2‐hydroxyethylmethacrylate‐hydroxyapatite) a Novel Composite for the Removal of Lead(II) from Aqueous Solutions     

Recep Akkaya 《洁净——土壤、空气、水》2012,40(11):1257-1264

In the present study, a novel adsorbent, poly (2‐hydroxyethylmethacrylate‐hydroxyapatite) [P(HEMA‐Hap)], was prepared and characterized. The synthesis was achieved by means of free‐radical polymerization and a number of structural characterization methods, including FT‐IR, XRD, TGA, SEM, BET‐porosity, and swelling tests. Pb²⁺ adsorption was performed using a series of pH, time, and temperature ranges. The reusability of the composite was also tested. The results obtained indicated that the novel adsorbent is able to bind Pb²⁺ ions with strong chemical affinity. The adsorption results were fitted to the classic Langmuir, Freundlich, and Dubinin–Radushkevich (D–R) sorption models. Thermodynamic parameters obtained demonstrated that the sorption process was spontaneous (ΔG < 0), endothermic (ΔH > 0), as expected. The process was also consistent with the pseudo‐second‐order model, and chemical adsorption was determined to be the rate‐controlling step. It was also shown that the composite could be used for five consecutive adsorption processes.  相似文献